1m/3.3ft DMX convert Cable(with Male Head and Waterproof Female Head) + 1m/3.3ft 3x2.5mm Power Cable(3 Pin US Plug and Female Head), for Waterproof Led Par Light.

3-Pin DMX Convert Cable Wire with Cannon XLR Male and Female Plugs for waterproof Par lights and LED bars and LED wall washers 3-Pin XLR Male and Female Cannon Head for DMX Signal Wire 3-Pin Neutrik PowerCon Male and Female Head Connectors for Power or Signal Input or Output Jacks for Stage Light and Speakers Outdoor Stage Lights Waterproof Cable Wire, With Male and Female Connectors for IP65 Led Par Light Hand in Hand Extension Cable Outdoor Stage Lights Cable Wire, DMX Cable(With Male and Female Head) + Power Cable(US Plug and Female Head) , for Waterproof Led Par Light or LED bar or other architecher lights.

Suitable for outdoor waterproof stage lighting.

Your stage lighting must be equipped with the same type of waterproof design connector plug, otherwise you can not use it.

Both are 1 meter (3.3 feet) long. The power cord has a US plug at one end and a waterproof female at the other end, It is connected to the male connector on the led par light. The signal cable is the XLR male cock, It can be directly connected to the console, and the other end is a female connector that is connected to the male on the led par light.

There are waterproof spiral caps on the power cord and signal cable.

Inside both are three copper core wires, each with multiple copper wires, the wire is soft, foldable, will not break, Wrapped with insulating plastic on the outside, no short circuit.